Skip to main content
HomeTechnical BlogGranulators & Size ReductionPlastic Recycling Machine Lubrication: Building a Reliable Inspection Routine
Granulators & Size Reduction•3 min read

Plastic Recycling Machine Lubrication: Building a Reliable Inspection Routine

Learn how to build a manufacturer-led lubrication and inspection routine for bearings, drives and moving components in recycling machinery.

ABS
ABS Engineering Team
Industrial Machinery Specialists
Published
November 17, 2026
Maintenance technician checking lubrication points on industrial plastic recycling machinery

Plastic Recycling Machine Lubrication: Building a Reliable Inspection Routine

Lubrication is a basic but important part of machinery care. A planned plastic recycling machine lubrication routine can help maintenance teams monitor bearings, drives and other components that require periodic attention. The correct lubricant, quantity and interval must always come from the equipment manufacturer's instructions.

This guide explains how to organise records and inspections without applying a one-size-fits-all schedule to different machines.

1. Start with the machine manual

Different machines use different bearings, gearboxes, seals and drive arrangements. Their lubrication requirements can vary by design, operating speed, load, temperature and environment.

Collect the latest manuals and identify every lubrication point. Record the specified lubricant type, quantity, interval and method. If the documentation is missing or unclear, request confirmation from the manufacturer before applying a substitute.

2. Build a lubrication-point register

Create a register for each machine. Include the component name, location, lubricant specification, service interval and responsible technician.

Use labels or a machine diagram to identify lubrication points where appropriate. This reduces the chance of missing a component or applying the wrong product.

3. Prevent contamination during lubrication

Dirt and water entering a lubrication point can contribute to wear or component damage. Keep containers, grease guns and fittings clean. Store lubricants in sealed, labelled containers and follow supplier storage instructions.

Use dedicated tools where different lubricant types are required. Do not mix products unless compatibility has been confirmed by the lubricant supplier or equipment manufacturer.

4. Watch for signs that need investigation

During routine inspections, look for unusual noise, vibration, temperature, leakage or visible contamination around components. These signs do not automatically prove a lubrication problem, but they should be recorded and investigated.

Do not over-lubricate. Excess lubricant can also create problems depending on the component design. Follow the specified quantity and method.

5. Consider the recycling plant environment

Plastic recycling machinery may operate around dust, water, heat and process residue. These conditions can affect inspection frequency and component protection.

Pay particular attention to equipment near washing areas and dusty size-reduction stages. Confirm whether seals, guards or other protective arrangements need inspection as part of the maintenance routine.

6. Coordinate lubrication with shutdown planning

Where possible, schedule routine service during planned maintenance windows. Follow safe isolation procedures before accessing moving machinery. Ensure the equipment is secured and cannot restart unexpectedly.

Use a checklist so technicians can record work completed, lubricant used, quantity and any unusual observations.

7. Review records and recurring issues

Maintenance records can help identify repeated leaks, abnormal consumption or components that need closer inspection. Review the history with the maintenance team and consult the manufacturer if the same issue continues.

A simple record should capture:

  • Machine identification and running hours
  • Component and lubrication point
  • Lubricant specification
  • Date and quantity applied
  • Technician name
  • Inspection observations
  • Follow-up action

8. Make the routine machine-specific

Do not copy the lubrication interval from another machine unless the manufacturer confirms it applies. Changes in operating hours, load or environment may require a review by the responsible service professional.

Explore the ABS Polymers machinery range, review plant solutions, or contact our team for machinery-related discussions.

A reliable lubrication programme combines manufacturer instructions, clean handling, safe access and accurate records. It should form part of a wider preventive maintenance system rather than replace inspections or condition monitoring.

Tags:LubricationPreventive MaintenanceMachine Care