Skip to main content
HomePlant SolutionsPP Hot Washing Plant
PP Hot Washing Plant
Turnkey Plant Engineering

PP Hot Washing Plant

Advanced Hot Washing for Cleaner PP Recycling

The ABS POLYMERS PP Hot Washing Plant is an integrated plastic recycling solution designed to clean PP rigid scrap, mixed PP scrap and post-consumer PP waste. Combining hot washing, friction washing, high-speed washing, float/sink separation and two-stage drying, the plant helps remove dirt, oil, grease and other surface contaminants before downstream granulation. Custom-built capacity configurations, stainless-steel construction, water filtration and wastewater treatment options support the requirements of industrial plastic recyclers.

Polymer Scrap Compatibility:
PP CratesPP rigid scrapMixed PP scrapPost-consumer PP waste
WhatsApp Desk
Engineering Parameters Schedule

Plant Specifications Matrix

Verified operational metrics for the 500 kg/hr configuration, engineered for continuous 24/7 duty.

Throughput
500 kg/hr
Continuous operating rate
Power Schedule
120 – 145 HP Total Connected Load
Havells 3-phase electrics
Water Circulation
2.5 – 3.5 m³/hr (closed-loop recycled)
Closed-loop water recycling
Footprint Schedule
24m L × 5.5m W × 4.2m H
Custom factory shed layout
Need custom voltage or layout?Inspect Full Matrix
PP Hot Washing Plant Turnkey Line
Turnkey Machinery Showcase

PP Hot Washing Plant

High-efficiency continuous polymer recovery line

Interactive Engineering Matrix

Technical Specifications & Engineering Matrix

Select a plant capacity configuration to dynamically inspect technical parameters, electric ratings, and layout schedules.

Specification ParameterConfigured Value for 500 kg/hr
Throughput Capacity500 kg/hr continuous output
Total Connected Power125 – 145 HP (Havells Heavy Electric Motors)
Water Circulation Volume2.5 – 3.5 m³/hr closed loop
Footprint Schedule24m L × 5.5m W × 4.2m H
Crusher Cutting Chamber600 × 500 mm (Water-injected rotor)
Blade SpecificationHigh Chromium EN41 Die Steel (Vacuum hardened 58-60 HRC)
Washing & Friction Tanks10 FT Heavy Gauge SS304 / MS Composite Basin
Centrifugal Dewatering Speed1440 RPM Dynamic Balanced Rotor
Final Flake Moisture Content< 1.8% moisture after centrifugal spin
Control ArchitectureHavells Switchgear & Synchronized Control Desk
Operating Crew Required2 Operators per shift
Delivery & CommissioningEx-works Coimbatore Works + Onsite Turnkey Erection
* Specifications verified at ABS Polymers manufacturing works, Coimbatore. Custom voltages (440V/480V 60Hz) available for Middle East export.
Engineering Overview

About the PP Hot Washing Plant

PP Hot Washing Plant — Advanced Hot Washing for Cleaner PP Recycling Overview The ABS POLYMERS PP Hot Washing Plant is designed for industrial plastic recyclers processing PP rigid scrap, mixed PP scrap and post-consumer PP waste. Its integrated washing and drying stages help remove dirt, oil, grease and other surface contaminants, preparing the processed material for downstream granulation. The plant is available in custom-built configurations, with capacity options stated as 250 kg/hour to 5 tons/hour, subject to final model and throughput confirmation. Multi-Stage Washing Process 1. Feeding System The conveyor feeding system transports prepared plastic scrap into the washing line. Feedstock preparation, including pre-sorting and size reduction, is required before washing. 2. Hot Washing The electrically heated hot washing tank operates at a stated temperature range of 60–80°C. Hot washing helps loosen oil, grease and stubborn surface contaminants. Automatic temperature control with a setpoint is specified. 3. Friction Washing The friction washer provides mechanical cleaning to help remove loosened dirt and contaminants from the plastic material. 4. Float/Sink Separation The separation tank supports the separation of materials based on their behaviour in the separation medium. Actual separation performance depends on material composition, density and contamination. 5. High-Speed Washing The high-speed washer provides an additional cleaning stage to improve the washing process before drying. 6. Centrifugal Drying The centrifugal dryer uses mechanical spinning to remove water from the washed material and reduce moisture before the final drying stage. 7. Hot-Air Drying The thermal hot-air dryer provides further moisture reduction. A target moisture content below 2% has been specified, but this must be validated through testing under defined operating conditions before being advertised as a guaranteed result. Water Circulation and Wastewater Treatment The proposed configuration includes water circulation and filtration, solid-waste screening, a settling or sedimentation tank, oil and grease separation, filtration and sludge dewatering. Treated water is partially reused in the plant, while collected sludge is intended for separate disposal. The stated fresh-water requirement is below 1,000 litres per hour. Actual consumption will depend on the selected capacity, feedstock contamination and operating conditions. Construction and Controls The hot washing tank, main frame and exterior finish are specified as stainless steel. The plant is described as fully automatic and includes a central electrical control panel. The stated electrical supply is 415 V, three-phase, 60 Hz, with a connected load above 200 kW. These electrical specifications must be checked against the final motor and heater schedule and the intended installation site's supply. Safety Provisions The stated safety features include emergency stop buttons, motor overload protection, electrical short-circuit protection, thermal protection for heating systems, guards for moving parts, low-water or dry-run protection, safety interlocks, temperature monitoring and control, hot-surface insulation or guarding, and operator warning labels. These features are reported as confirmed by engineering and should be reflected in the final equipment specification. Custom Engineering and Service ABS POLYMERS offers plant design and capacity customisation, manufacturing and supply, installation support, spare parts, after-sales technical support, on-site service visits, and export packing and international supply. Warranty and service coverage vary by project. The stated service arrangement provides one year of service for machinery, with electrical items excluded from the warranty. Exact coverage, exclusions and response terms should be documented in the quotation or warranty terms. Final Output The plant is intended to deliver washed and dried PP material for downstream granulation. Final cleanliness, moisture content, throughput and water consumption depend on the feedstock, configuration and operating conditions and should be confirmed through technical testing.

Need Plant Engineering for Your Facility?

We provide tailored 2D & 3D plant layout CAD drawings, custom power connection schedules, and turnkey installation support anywhere in India or the UAE.

Direct Works Line